FLEXIPLATE™ RECTANGULAR FLEXIBLE MOTORBIKE ENDURO NUMBER PLATE
THE ORIGINAL FLEXIPLATE™ Designed & manufactured in the UK.
Flexiplates™ are an ideal replacement for Enduro, Off-Road or Trail riding. Made from 1mm polycarbonate for maximum strength & durability, they are thinner, lighter & much more flexible than standard hard perspex plates which can break and is arguably dangerous to ride an enduro with.
What type of number plate do you use? A regulation giant square piece of acrylic or some duck tape with the registration written in marker? It’s a continual problem we have to weigh up when riding off-road where we are often climbing all over our bikes up and down hills and have a habit of crashing.
A FLEXIPLATE™ is one solution which in essence it does exactly what it says on the tin. It’s flexible and tough which means it can take the battering that riding off-road dishes out but is still clearly visible with the bike’s registration.
12 Sizes Available
4x3" - 4" wide x 3" high
5x4" - 5" wide x 4" high
5x4.5" - 5" wide x 4.5" high
6x4" - 6" wide x 4" high
6x5" - 6" wide x 5" high
7x4" - 7" wide x 4" high
7x5" - 7" wide x 5" high
7x5.5" - 7" wide x 5.5" high
7x6" - 7" wide x 6" high
8x6" - 8" wide x 6" high
8x7" - 8" wide x 7" high
9x7" - 9" wide x 7" high
Flexiplates™ are intended for off road events or show use only. They are NOT road legal & we accept no responsibility for any misuse.
Optional Accessories
Heavy duty double sided foam adhesive sticky pads*
2 Double sided self adhesive sticky pads
2 Yellow, 2 Black & 2 White hinged cover caps
6 Self tapping screws
2 Yellow, 2 Black, 2 White Nylon Bolts
6 Black plastic nuts
DURASTEALTH™
Give your plate a more stealthy look & add an extra layer of durability with our NEW DuraStealth backing. DURASTEALTH is applied to the back of the plate. It has a matte black finish which goes over the original plate backing giving you a double layer of protection.
*Some sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used.
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.
ORDER PROCESSING / SHIPPING TIMES
We always aim to process any order within 48 hours Monday - Friday, however at busy times it can take a little longer to get your order made & dispatched. If unsure or need by a specific date, please get in touch and we can advise our current processing times.
Please bear in mind we are a small business, orders may take slightly longer during peak times such as after Bank holidays & Christmas.
No orders are processed on weekends or bank holidays.
UK SHIPPING*
Royal Mail 2nd class* - (3-5 business days from receiving your shipping confirmation)
Royal Mail 1st Class* - (1-3 business days from receiving your shipping confirmation)
Royal Mail next day special delivery 1pm* - Order must be placed before 9am Monday-Thursday for us to dispatch same day. If your order is placed after 9am on a Thursday it will be posted on Friday with delivery on Monday.
Royal mail next day special delivery SATURDAY* - (Order must be placed before 9am on Friday to guarantee delivery on Saturday)
*Jersey, Isle of Man & the Channel Islands please add an extra 2 working days to any of the services offered above. Delivery times given are approximate and we take no responsibility to any delays at any point which is out of our control. No refunds are given for shipping costs if not delivered on time however you can pursue a claim with Royal Mail if you wish.
INTERNATIONAL SHIPPING*
Any order shipped outside of the UK is sent via with Royal Mail International Tracked & Signed service. Delivery timescales are shown below but we usually suggest 5-15 working days due to customs etc. You may be liable for any import duties/taxes.
*Delivery times given are approximate and we take no responsibility to any delays at any point which is out of our control. No refunds are given for shipping costs if not delivered on time however you can pursue a claim with Royal Mail if you wish.
Follow these steps as a guide to fit your new plate...
30 Day warranty only applies when you use our fixings.
Fitting with sticky pads*:
1. Remove the old plate, clean the area where the new plate is to be fitted.
2. Apply adhesive pads to the plate, and remove the film from them.
3. Position the plate over desired location, ensuring it is straight and level.
4. Once in correct position press the plate down firmly, and the adhesive pads will stick.
5. Peel away the protective film from the plate.. And your all done!
* Some strong sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used for warranty to be valid.
Fitting with screws/bolts see below**:
1. Remove the old plate, clean the area where the new plate is to be fitted.
2. Place the old number plate on top of your new one and use it as a guide to measure where the holes need to be drilled into the new plate.
3. Carefully drill through the holes and into your new plate with an appropriately sized drill bit.
4. We highly recommend putting sticky pads on the back of the plate where the screw holes are, this prevents any damage or water getting into the backing of the plate during vehicle use.
5. Fix the plate to your vehicle using the screws/bolts
6. Peel away the protective film from the plate.. And your all done!
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.
Curved panels/ Hanger brackets
If fitting Flexi Plates to a permanently curved surface like a curved hanger bracket or curved mudguard we highly recommend a vinyl stick on plate not a rigid plate.
Although Flexiplates™ are extremely durable, they are not indestructible due to the nature of the sport.
We offer a 30 day warranty on all our plates that have been fitted correctly. See our fitting instructions here as a guide if needed.
If you have any problem within 30 days from your order been dispatched please get email us info@flexiplates.co.uk with your order number and any photos to help us assist you further.
* Some sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used for warranty to be valid.
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.