FLEXIPLATE PRO™ - FLEXIBLE MOTORBIKE ENDURO NUMBER PLATE
FLEXIPLATE PRO ™ are an ideal replacement for Enduro, Off-Road or Trail riding.
Need something a little thicker, more rigid than our standard Flexi plate? Our PRO range are designed to be even tougher than our Original Flexiplate, manufactured from thicker 1.5mm polycarbonate for maximum strength & durability, they are thinner and lighter than standard perspex plates which can break easily and is arguably dangerous to ride an enduro with. Our PRO plates are a favourable middle ground between a flexible plate & a standard hard acrylic plate.but more rigid than our standard Flexi plate
What type of number plate do you use? A regulation giant square or a piece of duck tape with the registration written in magic marker? It’s a perennial problem we have to weigh up when riding off-road where we are often climbing all over our bikes up and down hills and have a habit of crashing.
A FLEXIPLATE PRO™ is one solution which in essence it does exactly what it says on the tin. It’s flexible and tough which means it can take the battering that riding off-road dishes out but is still clearly visible with the bike’s registration.
6 Sizes Available
5x4" - 5" wide x 4" high
6x5" - 6" wide x 5" high
7x5" - 7" wide x 5" high
7x6" - 7" wide x 6" high
8x6" - 8" wide x 6" high
9x7" - 9" wide x 7" high
Flexiplates™ are intended for off road events or show use only. They are NOT road legal & we accept no responsibility for any misuse.
Optional Accessories
Heavy duty double sided foam adhesive sticky pads*
2 Double sided self adhesive sticky pads
2 Yellow, 2 Black & 2 White hinged cover caps
6 Self tapping screws
2 Yellow, 2 Black, 2 White Nylon Bolts
6 Black plastic nuts
DURASTEALTH™
Give your plate a more stealthy look & add an extra layer of durability with our NEW DuraStealth backing. DURASTEALTH is applied to the back of the plate. It has a matte black finish which goes over the original plate backing giving you a double layer of protection.
*Some sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used.
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.
📦 Shipping Policy
Order Processing Times
We aim to dispatch all orders on the same day if placed before 9am. During busy periods, dispatch may take a little longer as each item is custom made to order.
Please allow extra time during peak seasons such as Bank Holidays, Christmas, or promotional sales.
Note: We do not process or dispatch orders on weekends or Bank Holidays.
🇬🇧 UK Delivery Information
(England, Scotland, Wales, Isle of Man, Channel Islands)
We offer several Royal Mail shipping options at checkout:
-
Royal Mail 2nd Class (Untracked) – Aims to deliver 3–5 working days after dispatch
-
Royal Mail 1st Class (Untracked) – Aims to deliver 2–3 working days after dispatch
-
Royal Mail Tracked 24 – Aims to deliver 1–2 working days after dispatch
-
Royal Mail Tracked 48 – Aims to deliver 2–3 working days after dispatch
Deliveries to Scottish Highlands, Islands, Isle of Man, and Channel Islands may take up to 2 extra working days.
⏳ Please note:
Delivery times are estimates provided by Royal Mail and may vary due to factors outside our control. We do not offer refunds for delays caused by Royal Mail once your order has been dispatched.
⚠️ Important: Choosing an Untracked Service
📦 If you select 1st or 2nd Class (untracked) postage, please be aware we cannot provide delivery updates once your item has been dispatched.
For peace of mind and delivery updates, we recommend choosing a Tracked 24 or Tracked 48 service at checkout.
We cannot accept responsibility for items lost or delayed via untracked methods but we will of course do everything to help.
🌍 International Shipping
🚫 We no longer ship internationally, including Northern Ireland or the EU.
Due to new EU General Product Safety Regulation (GPSR) laws effective from December 2024, we are unfortunately unable to ship to Northern Ireland or the EU.
Although Northern Ireland is part of the UK, it currently follows EU product safety laws for cross-border sales. These new regulations require:
-
Extensive legal documents and safety files for each product
-
A designated “Responsible Person” based in the EU or Northern Ireland
-
Ongoing regulatory oversight and high legal costs
These requirements are not feasible for our small business at this time.
📝 Alternative:
You are welcome to ship your order to a UK address (England, Scotland or Wales), and have it forwarded to Northern Ireland or the EU privately.
We truly hope the rules become more accessible in the future so we can resume shipping across all regions again.
Follow these steps as a guide to fit your new plate...
30 Day warranty only applies when you use our fixings.
Fitting with sticky pads*:
1. Remove the old plate, clean the area where the new plate is to be fitted.
2. Apply adhesive pads to the plate, and remove the film from them.
3. Position the plate over desired location, ensuring it is straight and level.
4. Once in correct position press the plate down firmly, and the adhesive pads will stick.
5. Peel away the protective film from the plate.. And your all done!
* Some strong sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used for warranty to be valid.
Fitting with screws/bolts see below**:
1. Remove the old plate, clean the area where the new plate is to be fitted.
2. Place the old number plate on top of your new one and use it as a guide to measure where the holes need to be drilled into the new plate.
3. Carefully drill through the holes and into your new plate with an appropriately sized drill bit.
4. We highly recommend putting sticky pads on the back of the plate where the screw holes are, this prevents any damage or water getting into the backing of the plate during vehicle use.
5. Fix the plate to your vehicle using the screws/bolts
6. Peel away the protective film from the plate.. And your all done!
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.
Curved panels/ Hanger brackets
If fitting Flexi Plates to a permanently curved surface like a curved hanger bracket or curved mudguard we highly recommend a vinyl stick on plate not a rigid plate.
Although Flexiplates™ are extremely durable, they are not indestructible due to the nature of the sport.
We offer a 30 day warranty on all our plates that have been fitted correctly. See our fitting instructions here as a guide if needed.
If you have any problem within 30 days from your order been dispatched please get email us info@flexiplates.co.uk with your order number and any photos to help us assist you further.
* Some sticky pads such as 3M may react/cause damage to the plate, we will not warranty this. So we advise our sticky pads are used for warranty to be valid.
** Do not over tighten your screws, nuts or bolts as this will damage your plate, we will not warranty this.
